Multi-Switch 16 Module – Order # 8084
This module expands one proportional transmitter channel into 16 switched functions. It features five 3-positions switches, 2 on/off switches/momentary switches and a 2-position momentary switch.
Multi-Switch 16 decoder Memory – Order # 8369
For each Multi-Switch module one decoder is required at the receiver end. The decoder only occupies one servo channel, but provides direct control of 16 switched channels. Operating voltage 4.8-24 volts, up to 1.8 A per output. It features memory function, which can be switched off if preferred. All the channels assigned to one physical switch can be switched on simultaneously. This decoder can also process the switched functions of teh 8-channel switch module; in this case only 8 channels can be controlled. The output stage is short-circuit, reverse polarity and overheating protected. Cables are not supplied and need to be purchased separately as required.
Multi-Switch-Prop 12+2 Module – Order # 8101
This module takes up one proportional channel of the transmitter and expands it into 12 switched and 2 (proportional) servo channels. It features four 3-way momentary switch, one on/off / momentary switch and 2 rotary knobs.
Multi-Switch-Prop 12+2 Decoder Memory- Order # 8370
For each Multi-Switch-Prop module there is one decoder required at the receiver end. The decoder occupies one servo channel, but provided direct control of 12 switched channels and 2 servo channels. Operating voltage 4.8 – 24 Volt, up to 2.7 A per output. All channels assigned to one physical switch can be switched on simultaneously. If prefered, the memory function can be switched off. The output stage is short-circuit, reverse polarity and overheating protected. Cables are not supplied and need to be purchaed separately as required.
Multi-Prop 8 Module – Order # F1512
This module expands one proportional transmitter channel to produce 8 separate channels, and provides accurate proportional and simultaneous control of 8 channels.
Multi-Prop 4+4 Module – Order # 8039
Same as F1512, but with 4 switches and 4 rotary knob controls. Ideal for all application where your transmitter lacks one proportional challen.
Multi-Prop 8 Decoder – Order # 8042
For each Multi-Prop module one decoder is required. It takes only one servo channel, but can control 8 servo and/or speed controllers independently of each other. Operating voltage 4.8 – 6 V, without cables.
Multi-Module Cover Plate F-14 – Order # F1499
Module cover with label areas, designed to fit the bottom transmitter option well. Cover plate with legend area, fits lower transmitter option well. For modules with 6 or 8 controls.
Multiprop Decoder – Order # F1516
Designed for controlling auxiliary functions, and expands on proportional channel on the transmitter to provide independent control of 8 servos or speed controllers. Operation voltage 4.8 – 6 Volts. Includes 8 x F1439 connection leads.
Mini-Option F-14 – Order # F1540
Mixer module for mixing two control functions, e.g. trim tabs and speed control. To switch off the module a mixer switch No. 1502 (not included) is required.
Dual rate Module F-14 – Order # F1541
It provides viable reduced travel on two control functions with the range of 30-100%. To switch off the module a mixer switch No. F1502 (not included) is required.
Mixer Switch 2-Position short – Order #F1502
For F-14 transmitters. Used to switch mixed functions on and off.
Transistor Reversing Switch – Order # 8249
Connect this unit to a Multi-Switch decoder to run motors up to 1 A current consumption forward, stop and reverse. Operating voltage 6-12 V.
Mono Switch – Order # 83172000
Electronic switch for momentary functions, such as sounding a siren, horn etc. Specifications: operating voltage 4.8 – 6 V, switched voltage 24 V, switched current 2 A.
Mono Switch Memory – Order # 83182000
Same as Mono Switch, but with memory, i.e. switched function remains until the stick is operated again. Specifications as Mono Switch.
Duo Switch – Order # 83192000
2-channel switching module for controlling two separate switched functions, or when specially wired, for reversing electric motors. Specifications as Mono Switch.
Duo Switch Memory – Order # 83202000
Same as Duo Switch, but with memory. Specifications as Mono Switch.
Relay Module – Order # 8303
To be used with Multi-Switch decoder, to increase the current to be handled up to 16 A max. Suitable for functions with high current requirements such as electric motors, pumps, etc.
Relay reversing Module – Order # 8304
Double switch relay to be used with Multi-Switch decoder. Functions: stop (both relays open or closed), forward (only relay 1 closed), reverse (only relay 2 closed). Maximum drive current is 16 A.