Radio Accessories
Expansion Modules for F-14 - Navy Radio

Multi-Switch 16 Module
Order # 8084

This module expands one propotional transmitter channel into 16 switched functions. It features five 3-positions switches, 2 on/off switches/momentary switches and a 2-position momentary switch.

Multi-Switch 16 decoder Memory
Order # 8369

For each Multi-Switch module one decoder is required at the receiver end. The decoder only occupies one servo channel, but provides direct control of 16 switched channels. Operating voltage 4.8-24 volts, up to 1.8 A per outut. It features memory function, which can be switched off if prefered. All the channels assigned to one physical switch can be switched on simultaneously. This decoder can also process the switched functions of teh 8-channel switch module; in this case only 8 channels can be controlled. The output stage is short-circuit, reverse polarity and overheaing protected. Cables are not supplied and need to be purchased separately as required.

Multi-Switch-Prop Module
Order # 8101

This module takes up one proportional channel of the transmitter and expands it into 12 switched and 2 (proportional) servo channels. It features four 3-way momentary switch, one on/off / momenary switch and 2 rotary knobs.

Multi-Switch-Prop 12+2 Decoder Memory
Order # 8370

For each Multi-Switch-Prop module there is one decoder required at the receiver end. The decoder occupies one servo channel, but provided direct control of 12 switched channels and 2 servo channels. Operating voltage 4.8 - 24 Volt, up to 2.7 A per output. All channels assigned to one physical switch can be switched on simultaneously. If prefered, the memory function can be switched off. The output stage is short-circuit, reverse polarity and overheating protected. Cables are not supplied and need to be purchaed separately as required.

Multi-Prop 8 Module
Order # F1512

This module expands one proportional transmitter channel to produce 8 separate channels, and provides accurate proportional and simultaneous control of 8 channels.

Multi-Prop 4+4 Module
Order # 8039

Same as F1512, but with 4 switches and 4 rotary knob controls.

Multi-Prop 8 Decoder
Order # 8042

For each Multi-Prop module one decoder is required. It takes only one servo channel, but can control 8 servo and/or speed controllers independently of each other. Operating voltage 4.8 - 6 V, without cables.

Multi-Module Cover Plate F-14
Order # F1499

Cover plate with legend area, fits lower transmitter option well. For modules with 6 or 8 controls.

Mini-Option F-14
Order # F1540

Mixer module for mixing two control functions, e.g. trim tabs and speed control. To switch off the modulw a mixer switch No. 1502 (not included) is required.

Dual rate Module F-14
Order # F1541

It provides vaiable reduced travel on two control functions with th erange of 30-100%. To switch off the module a mixer switch No. F1502 (not included) is required.

Genoa Module F-14
Order # 8305

Control Module for operating the Genoa or Blister sail on model sailing boats. Separate adjustment of running direction and trim values. It is an indispensable option module for easy and convenient control of any boomless foresail. Fits in one of the central option wells. A stick order linear slider module, No. F1601 (not included) serves as physical control.

Transistor Reverser
Order # 8249

Connect this unit to a Multi-Switch decoder to run motors up to 1 A current consumption foward, stop and reverse. Operating voltage 6-12 V.

Mono Switch
Order # 83172000

Electronic switch for momentary functions, such as sounding a siren, horn etc. Specifications: operating voltage 4.8 - 6 V, switched voltage 24 V, switched current 2 A.

Mono Switch Memory
Order # 83182000

Same as Mono Switch, but with memory, i.e. switched function remains until the stick is operated again. Specifications as Mono Switch.

Duo Switch
Order # 83192000

2-channel switching module for controlling two separate switched functions, or when specially wired, for reversing electric motors. Specifications as Mono Switch.

Duo Switch Memory
Order # 83202000

Same as Dou Switch, but with memory. Specifications as Mono Switch.

Relay Module
Order # 8303

To be used with Multi-Switch decoder, to increase the current to be handled up to 16 A max. Suitable for functions with high current requirements such as electric motors, pumps, etc.

Relay reversing Module
Order # 8304

Double switch relay to be used with Multi-Switch decoder. Functions: stop (both relays open or cloded), foward (only relay 1 closed), reverse (only relay 2 closed). Maximum drive current is 16 A.

We make every attempt to keep our prices as low as possible.  As a result, many items found on our website will not have a price associated.  Please call or E-Mail us for an immediate quote of our best price.

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

NO REFUNDS ON KITS